Praktik OSPF sederhana pada Mikrotik
Loncat ke navigasi
Loncat ke pencarian
Sambungan
R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet
R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3: -- LAN 172.16.1.1/16
R3: eth1: -- R1: eth1 eth2: -- R2: eth2 eth3: -- LAN 192.168.1.1/24
IP address
Router1:
/ip address add address=10.10.1.1/30 interface=ether1 /ip address add address=10.10.1.5/30 interface=ether2 # /ip address add address=192.168.122.100/24 interface=ether3 # /ip address add address=192.168.122.101/24 interface=ether3 # /ip address add address=192.168.122.102/24 interface=ether3 /ip dhcp-client remove number=0 /ip dhcp-client add interface=ether3 disabled=no # kalau ether3 DHCP client
/ip firewall nat add chain=srcnat out-interface=ether3 action=masquerade /ip firewall nat print
Router2:
/ip address add address=10.10.1.6/30 interface=ether1 /ip address add address=10.10.1.9/30 interface=ether2 /ip address add address=172.16.1.1/16 interface=ether3
Router3:
/ip address add address=10.10.1.2/30 interface=ether1 /ip address add address=10.10.1.10/30 interface=ether2 /ip address add address=192.168.1.1/24 interface=ether3
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
# /routing ospf instance add name=default /routing ospf instance set name=default router-id=10.10.1.1 numbers=0 /routing ospf instance enable numbers=0 /routing ospf network add network=10.10.1.0/30 area=backbone /routing ospf network add network=10.10.1.4/30 area=backbone
R2:
# /routing ospf instance add name=default /routing ospf instance set name=default router-id=10.10.1.6 numbers=0 /routing ospf instance enable numbers=0 /routing ospf network add network=10.10.1.4/30 area=backbone /routing ospf network add network=10.10.1.8/30 area=backbone /routing ospf network add network=172.16.0.0/16 area=backbone
R3:
# /routing ospf instance add name=default /routing ospf instance set name=default router-id=10.10.1.2 numbers=0 /routing ospf instance enable numbers=0 /routing ospf network add network=10.10.1.0/30 area=backbone /routing ospf network add network=10.10.1.8/30 area=backbone /routing ospf network add network=192.168.1.0/24 area=backbone
Cek
/routing ospf instance print
Flags: X - disabled
0 name="default" router-id=10.10.1.1 distribute-default=never
redistribute-connected=as-type-1 redistribute-static=as-type-1
redistribute-rip=no redistribute-bgp=no redistribute-other-ospf=no
metric-default=1 metric-connected=20 metric-static=20 metric-rip=20
metric-bgp=auto metric-other-ospf=auto in-filter=ospf-in out-filter=ospf-out
Verify
Cek
R1:
/routing ospf interface print /routing ospf neighbor print /ip route print
Lakukan yang sama untuk R2, R3
Referensi
Pranala Menarik