Basic Configurasi Mikrotik: Perbedaan antara revisi
Loncat ke navigasi
Loncat ke pencarian
kTidak ada ringkasan suntingan |
|||
| (23 revisi perantara oleh pengguna yang sama tidak ditampilkan) | |||
| Baris 1: | Baris 1: | ||
{{DISPLAYTITLE:Konfigurasi Dasar Router Mikrotik}} | {{DISPLAYTITLE:Konfigurasi Dasar Router Mikrotik}} | ||
[[Berkas:Koneksi dari internet sampai ke pengguna.png|jmpl|Koneksi dari internet sampai ke pengguna]] | [[Berkas:Koneksi dari internet sampai ke pengguna.png|jmpl|Koneksi dari internet sampai ke pengguna]] | ||
===='''IP Address Default Router Mikrotik'''==== | |||
IP Address Default = 192.168.88.1 | IP Address Default = 192.168.88.1 | ||
===='''Username dan Password Default Router Mikrotik'''==== | |||
User = Admin | User = Admin | ||
Password = (kosong) | Password = (kosong) | ||
[[Berkas:Koneksi router mikrotik ke isp.png|jmpl|322x322px|Menghubungukan router mikrotik ke ISP(Internet Service Provider)]] | |||
====Memberikan nama perangkat==== | |||
/system identity set name=pcrouter | /system identity set name=pcrouter | ||
====Set Time Zone, Tanggal dan Waktu di Mikrotik==== | |||
/system clock | [admin@MikroTik] > /system clock set time-zone-autodetect=yes | ||
[admin@MikroTik] > /system clock set time=06:06:05 | |||
/set time= | [admin@MikroTik] > /system clock set date=sep/26/2021 | ||
/set date= | [admin@MikroTik] > /system clock set time-zone-name=Asia/Jakarta | ||
/set time-zone-name=Asia/Jakarta | |||
====Memberi Nama Interface Mikrotik==== | |||
<code>/interface ethernet set ether1 name=ether1-internet</code> | <code>/interface ethernet set ether1 name=ether1-internet</code> | ||
[ | ====Configurasi IP Address==== | ||
Contoh Perintah<span> </span>: | |||
[admin@MikroTik] > ip address add address=192.168.1.1/24 interface=ether1 | |||
===='''Configurasi IP Gateway'''==== | |||
<code>/ip route add gateway=192.168.1.1</code> | <code>/ip route add gateway=192.168.1.1</code> | ||
====Configurasi DNS==== | |||
<code>/ip dns set servers=1.1.1.1 8.8.8.8 | <code>/ip dns set servers=1.1.1.1 8.8.8.8 | ||
set allow-remote-requests=yes</code> | set allow-remote-requests=yes</code> | ||
====Configurasi NAT==== | |||
<code>/ip firewall nat add chain=srcnat src-address=172.16.1.0/24 out-interface=ether1-internet action=masquerade</code> | <code>/ip firewall nat add chain=srcnat src-address=172.16.1.0/24 out-interface=ether1-internet action=masquerade</code> | ||
====Backup & Restore Setingan Mikrotik==== | |||
=====Backup<span> </span>:===== | =====Backup<span> </span>:===== | ||
<code>/system backup save name="basic-config-051019"</code> | <code>/system backup save name="basic-config-051019"</code> | ||
| Baris 49: | Baris 44: | ||
<br /> | <br /> | ||
======Login Default | |||
===LANGKAH-LANGKAH KONFIGURASI ROUTER SEDERHANA=== | |||
====Login Default==== | |||
User = admin | User = admin | ||
Password = (default belum ada password) | Password = (default belum ada password) | ||
====Setup Identity<span> </span>: R1(memberi nama router mikrotik)==== | |||
[admin@MikroTik] > system identity set name=R1 | [admin@MikroTik] > system identity set name=R1 | ||
[admin@R1] > | [admin@R1] > | ||
====Cek ethernet mikrotik==== | |||
[admin@R1] > interface print | [admin@R1] > interface print | ||
Flags: D - dynamic, X - disabled, R - running, S - slave | Flags: D - dynamic, X - disabled, R - running, S - slave | ||
| Baris 67: | Baris 65: | ||
4 R ether5 ether 1500 08:00:27:A3:44:12 | 4 R ether5 ether 1500 08:00:27:A3:44:12 | ||
==== | ====Ketentuan IP Address yang akan di tambahkan<span> </span>:==== | ||
ether1 : DHCP-Client | ether1 : DHCP-Client | ||
ether2 : 192.168. | ether2 : 192.168.2.1/24 | ||
ether3 : 192.168. | ether3 : 192.168.3.1/24 | ||
ether4 : | ether4 : 192.168.4.1/24 | ||
ether5 : 192.168.5.1/24 | |||
====Setup DHCP-Client==== | |||
Lakukan setup dhcp-client agar ether1 pada router ini mendapat ip dari sumber internet secara otomatis. | |||
[admin@R1] > ip dhcp-client set ether1 disabled=no use-peer-dns=yes | |||
Cek DHCP-Client | Pastikan ether1 sudah dapat IP Address | Cek DHCP-Client | Pastikan ether1 sudah dapat IP Address | ||
[admin@R1] > ip dhcp-client print | [admin@R1] > ip dhcp-client print | ||
====Setting ip==== | |||
[admin@R1] > ip address add address 192.168. | [admin@R1] > ip address add address=192.168.2.1/24 interface=ether2 | ||
[admin@R1] > ip address add address 192.168. | [admin@R1] > ip address add address=192.168.3.1/24 interface=ether3 | ||
[admin@R1] > ip address add address | [admin@R1] > ip address add address=192.168.4.1/24 interface=ether4 | ||
[admin@R1] > ip address add address=192.168.5.1/24 interface=ether5 | |||
Cek konfigurasi ip address, pastikan semua ethernet sudah terdapat ip address sesuai ketentuan | Cek konfigurasi ip address, pastikan semua ethernet sudah terdapat ip address sesuai ketentuan | ||
[admin@R1] > ip address print | [admin@R1] > ip address print | ||
======Setup Gateway | ====Setup DHCP Server pada masing-masing port==== | ||
[admin@R1] > ip route add gateway=192.168. | Dibawah ini adalah contoh setup dhcp-server pada ether2 jika menghendaki pada setiap ethernet memiliki dhcp-server silahkan lakukan hal yang sama pada setiap ethernet seperti langkah berikut. | ||
[admin@R1] > ip dhcp-server setup | |||
Select interface to run DHCP server on | |||
dhcp server interface: ether2 | |||
Select network for DHCP addresses | |||
dhcp address space: 192.168.2.0/24 | |||
Select gateway for given network | |||
gateway for dhcp network: 192.168.2.1 | |||
Select pool of ip addresses given out by DHCP server | |||
addresses to give out: 192.168.2.2-192.168.2.254 | |||
Select DNS servers | |||
dns servers: 192.168.137.1 | |||
Select lease time | |||
====Setup Gateway==== | |||
[admin@R1] > ip route add gateway=192.168.137.97 | |||
====Setup DNS==== | |||
[admin@R1] > ip dns set servers=8.8.8.8 allow-remote-requests=yes | |||
[admin@R1] > ip dns print | |||
==== Tambahkan NAT ==== | |||
[admin@R1] > /ip firewall nat add chain=srcnat src-address=0.0.0.0/0 out-interface=ether1 action=masquerade | |||
====== | ==== Test Koneksi dengan perintah ping ==== | ||
Jika semua proses sudah selesai silahkan lakukan test koneksi dari atau ke semua interface | |||
Revisi terkini sejak 26 September 2021 00.00
IP Address Default Router Mikrotik
IP Address Default = 192.168.88.1
Username dan Password Default Router Mikrotik
User = Admin Password = (kosong)
Memberikan nama perangkat
/system identity set name=pcrouter
Set Time Zone, Tanggal dan Waktu di Mikrotik
[admin@MikroTik] > /system clock set time-zone-autodetect=yes [admin@MikroTik] > /system clock set time=06:06:05 [admin@MikroTik] > /system clock set date=sep/26/2021 [admin@MikroTik] > /system clock set time-zone-name=Asia/Jakarta
Memberi Nama Interface Mikrotik
/interface ethernet set ether1 name=ether1-internet
Configurasi IP Address
Contoh Perintah :
[admin@MikroTik] > ip address add address=192.168.1.1/24 interface=ether1
Configurasi IP Gateway
/ip route add gateway=192.168.1.1
Configurasi DNS
/ip dns set servers=1.1.1.1 8.8.8.8
set allow-remote-requests=yes
Configurasi NAT
/ip firewall nat add chain=srcnat src-address=172.16.1.0/24 out-interface=ether1-internet action=masquerade
Backup & Restore Setingan Mikrotik
Backup :
/system backup save name="basic-config-051019"
Restore :
/system backup load name="basic-config-051019"
LANGKAH-LANGKAH KONFIGURASI ROUTER SEDERHANA
Login Default
User = admin Password = (default belum ada password)
Setup Identity : R1(memberi nama router mikrotik)
[admin@MikroTik] > system identity set name=R1 [admin@R1] >
Cek ethernet mikrotik
[admin@R1] > interface print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE ACTUAL-MTU L2MTU MAX-L2MTU MAC-ADDRESS 0 R ether1 ether 1500 08:00:27:11:49:EC 1 R ether2 ether 1500 08:00:27:49:67:52 2 R ether3 ether 1500 08:00:27:43:D7:2E 3 R ether4 ether 1500 08:00:27:7F:12:39 4 R ether5 ether 1500 08:00:27:A3:44:12
Ketentuan IP Address yang akan di tambahkan :
ether1 : DHCP-Client ether2 : 192.168.2.1/24 ether3 : 192.168.3.1/24 ether4 : 192.168.4.1/24 ether5 : 192.168.5.1/24
Setup DHCP-Client
Lakukan setup dhcp-client agar ether1 pada router ini mendapat ip dari sumber internet secara otomatis.
[admin@R1] > ip dhcp-client set ether1 disabled=no use-peer-dns=yes
Cek DHCP-Client | Pastikan ether1 sudah dapat IP Address
[admin@R1] > ip dhcp-client print
Setting ip
[admin@R1] > ip address add address=192.168.2.1/24 interface=ether2 [admin@R1] > ip address add address=192.168.3.1/24 interface=ether3 [admin@R1] > ip address add address=192.168.4.1/24 interface=ether4 [admin@R1] > ip address add address=192.168.5.1/24 interface=ether5
Cek konfigurasi ip address, pastikan semua ethernet sudah terdapat ip address sesuai ketentuan
[admin@R1] > ip address print
Setup DHCP Server pada masing-masing port
Dibawah ini adalah contoh setup dhcp-server pada ether2 jika menghendaki pada setiap ethernet memiliki dhcp-server silahkan lakukan hal yang sama pada setiap ethernet seperti langkah berikut.
[admin@R1] > ip dhcp-server setup Select interface to run DHCP server on dhcp server interface: ether2 Select network for DHCP addresses dhcp address space: 192.168.2.0/24 Select gateway for given network gateway for dhcp network: 192.168.2.1 Select pool of ip addresses given out by DHCP server addresses to give out: 192.168.2.2-192.168.2.254 Select DNS servers dns servers: 192.168.137.1 Select lease time
Setup Gateway
[admin@R1] > ip route add gateway=192.168.137.97
Setup DNS
[admin@R1] > ip dns set servers=8.8.8.8 allow-remote-requests=yes [admin@R1] > ip dns print
Tambahkan NAT
[admin@R1] > /ip firewall nat add chain=srcnat src-address=0.0.0.0/0 out-interface=ether1 action=masquerade
Test Koneksi dengan perintah ping
Jika semua proses sudah selesai silahkan lakukan test koneksi dari atau ke semua interface